Verus Engineering Full Brake Cooling Kit Subaru WRX/STI (VA) 2018-2021

During the design process; we utilized in-house scan data to design the components. This resulted in a product that features a near OEM fit and finish.

The Verus brake cooling kit was designed for owners looking to maximize their brakes cooling efficiency and increase their brakes ability to do their job.

Included:

• Backing Plate Incl. Carbon Ducts Riveted On (2, LH and RH)
• 2.5 Inches Pre-Cut Silicone High Temp Brake Hose (2)
• Fender Pancake Duct (2)
• Fender Pancake Duct Bracket (2)
• 3.0 Inches Pre-Cut Neoprene Brake Hose (2)
• 3.0 Inches Stainless Hose Clamp (4)
• 2.5 Inches Stainless Hose Clamp (4)
• Foglight Duct (2)
• Hardware Kit, Includes All Necessary Pieces to Install Kit Seamlessly

Via tuft testing and thermal image testing, it is clear that the brake cooling kit is highly effective even when used with the OEM rotors which have quite small vanes when compared to those of big brake kits. Smaller vanes will hurt flow and cooling due to the reduced size. With the brake cooling kit, the rotors remained much cooler directly after applying the brakes as well as after a short drive without using the brakes. It is also apparent that at high rates of speed, the brake cooling kit does significantly more than at lower speeds. This makes a lot of sense as the kit works by using frontal ambient air and funneling it into the center of the rotor. At higher speeds, pressure and flow rates are greater than at low speeds. We have heard reports back from customers tracking their cars having reduced brake fade, reduced rotor cracking, improved pad wear, and reduced brake fluid boiling. As a result, this is a great kit to help keep brake components at an appropriate temperature during competition and|or track days.

Features:

• Direct Air into the Center of the Rotor
• Stainless Backing Plate Adds Even More Airflow into Center of the Rotor
• OEM Type Install
• Installs in a Few Hours With Minimal Hand Tools and Know-How
• Short Routing to Maximum Cooling Efficiency
• Pulls Air from High-Pressure Zone in Front Bumper
• Stainless Backing Plate
• Dry Carbon Air Duct
• Hard Plastic Fender Ducts (Pancake Duct)
• Hard Plastic Fog Light Ducts
• Pre-cut 3 Inches and 2.5 Inches Brake Duct Hose (Neoprene for Foglight, High Temp Silicone for Backing Plate)
• All Necessary Hardware Included
• Made in the U.S.A.

Fitment:

• Subaru WRX 2018-2021
• Subaru STI 2018-2021

Note:

• For complete compatibility, vehicles without OEM fog lights bezels will need to purchase the following items via Subaru (This includes 2018 models): -57731va390 and -57731va380
• 2018+ models with 6-Pot Calipers require trimming of the backing plate.
• Australian models require PN: 86631VA000 for complete compatibility. (USDM Windshield Washer Fluid Reservoir)

⚠WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov